Airvelope Model 39 - Installation, Operation and Maintenance Manual

Flanders ’ Model 39 AIRVELOPE ® Fan/Filter Module is energy efficient, self-powered HEPA filter module, with replaceable HEPA filter, that delivers ISO Class 5 or better airflow into Cleanrooms or clean process areas. Model 39 AIRVELOPE ® Modules are designed for placement in standard 1 ½” T-Bar ceiling grids. Since they require no ductwork or external air handling equipment, they can be placed in almost any location.

Pureflo-FPM - - Installation, Operation and Maintenance Manual

Pureflo-FPM Fan-Powered Module HEPA/ULPA Filter Modules are lightweight unitized low profile units consisting of a fan/motor assembly and a mini pleat HEPA/ULPA filter pack, designed to provide unidirectional vertical airflow from tee-bar ceilings. The modules are available in two sizes: nominal 24 in. x 24 in. and 24 in. x 48 in.; and in two types: a standard replaceable unit and a room side replaceable (RSR) filter. Module efficiencies are 99.99% on 0.3-micron particles or 99.9995% on 0.12-micron particles.

Installation Instructions for C-3 and C-3C Side Load Housings

C-3 Side Access HEPA/ULPA Filter Housings are designed for use with nominal 12 inch deep HEPA/ULPA filters. They are factory-assembled flanged units suitable for gel sealed or gasket sealed HEPA filters. Both the prefilters and the primary HEPA/ULPA filters are serviceable through the same gasketed side access door.

Flanders ESD Model 22 Hood Installation Instructions

The Flanders ESD Model-22 sets the new industry standard in terminal hood filtration for pharmaceutical and biotech Cleanrooms, or wherever hoods are regularly validated for performance and leak-free operation. They may be installed in a variety of ceiling types, including tee-bar ceilings, gel-seal grid systems, and plaster ceilings. Ideally suited for Class 100 “spot” applications, they may also be used to create Class 10,000 to Class 100,000 areas by locating the appropriate number of units in the ceiling. Units may also be installed for 100% ceiling coverage to achieve cleanliness levels to Class 10. roomside by simply removing the protective grille.

Installation Instructions for Surecarb 90 Side Load Housing

Surecarb 90 Side Access Carbon Filter Housings are designed to remove gas/vapor contaminants and to provide odor control for air purification. They are factory assembled flanged units suitable for installation in a duct or next to an air handling unit.